How to Cast a Baitcaster with A Light Lure

The main aim of using bait is to catch your target, and you must know how to cast it. Some people might find it difficult to use hence, advised to practice more often. Exercising patience during your first attempts will take you a long way. Using a suitable technique and tools, it should be a piece of cake.

This article will provide everything you need to know about casting bait using a light lure. We are here to guide you every step of the way. Here are some of the things you will need to know to make your work much easier and frustration-free.

First, when choosing your reel, go for one that not only perfectly conducts all your required duties but also has a light spool and fits your palm comfortably. The lighter the spool, the easier it would be for the light lure to spin it.

You definitely do not want to work with a reel that is causing more harm than good. It has an engine-like apparatus that acts as a brake. The main function of this brake-structured thing is to avoid any form of retaliation when fishing. Therefore, always ensure the brakes are off before you start fishing to avoid unnecessary frustrations.

Getting a reel with good quality is necessary, and it will enable you to have better line control and undoubted accuracy. Always keep in mind to use your wrist instead of your arm when throwing a light lure onto the bait caster. A better working reel is also an added advantage if you continue using your rod and reel for a long time.

Fast Action Tip

A good reel should be a little heavier than normal compared to the other light lures. Getting one with an undeniably fast tip is the icing on the cake. One key factor you should always consider is the flexibility of the rod. Its length should range from six to seven feet and six inches.

The main purpose of the rod is to help you fishing hence, reduce extra hand power. Limiting your hand movement enables you to be undetected by the fishing lurking nearby. The rod has a natural bend to it, and combining this with the lure's gravitational force, hurl your cast towards the water.

When fishing and your line keeps ending up in a tangle, try using your thumb to apply more pressure to keep it in check. You can either choose to use the up-and-down method or the smooth sideways cast. Go for the one that favorably works for you. As much as you want to catch fish, it does not hurt, making it enjoyable and memorable.

Fishing Line

Avoid the Fluorocarbon if you are a beginner since it has a lot of memory and does not cast that well. It is highly recommended for a beginner to go for the braided fishing line that is pretty convenient and reliable.

As you grow more confident and have better bearings, you can graduate to the fluorocarbon one, and many more you wish to test and explore. In areas where there are many weeds and plant matter, the braided fishing line is more efficient since it is strong. 

The chances of your line trapped are zero to none. In case you choose to use the monofilament line, ensure it is soft, and you use it in an open area.

How to Cast

Set your tension knob before starting to ensure you do not have any spool tangles. Start doing this by first turning off your brakes then tighten the tension knob. To get the right tension, press the casting button while slowly loosening the tension knob. Do this until the lure starts falling and hits the ground while the spool stops spinning.

Using one hand, take the rod back parallel to the ground. Do not cast overhead and most definitely do not power cast since it will end up in disaster; hence, use a long sweeping sidearm cast. Casting it upwards gives room to the very tangles you have been trying so hard to avoid.

This is because it will lose its speed while the spool keeps spinning, and since the force to bring out the line, it will end in a tangle. The best advice is to keep it lower to the ground until it hits the water to maintain the speed. Tightening the spool tension also helps in reducing the tangles.

Budget-friendly Casting Rod

Most anglers prefer Abu Garcia Vengeance since it is more reliable and pocket-friendly. It fits the requirements of a good rod with its splendid dimensions. The stainless steel rod has inserts that are purely from titanium oxide that works remarkably with no disappointments.

Abu Garcia Vengeance Casting Fishing Rod

Guarantees that your rod will work smoothly and efficiently all depend on the type of fishing equipment you purchase, and this is why you need to be smart when getting one. Some of the features of the Abu Garcia Vengeance rod has are:

  • It is stainless steel with Titanium Oxide inserts. 
  • It is durable.
  • Its EVA handles provide comfort when handling the equipment.
  • Has a well-balanced design.
  • Equipped with a Texas-rigged hook keeper for all bait applications.

Final Verdict

Having the correct tool and technique for fishing will give you an unforgettable experience when fishing. To avoid any backlashes and plastics blowing in the wind, pair up the rod, and reel properly. Following certain obvious rules will also make your life much easier. One of the rules is dropping the lure with about 30 inches of the line coming out of the tip.

Keeping all these precautions in mind will enable you to enjoy fishing facing no obstacles whatsoever. Remember, whether you are an amateur or a pro at casting baits and fishing, many people find it hard using light lures when casting their bait. Therefore, do not feel discouraged. Hope is not lost. Don’t forget to check out our list of top 10 spinning reel for bass fishing.

watch video to learn: How to Cast a Baitcaster with A Light Lure

Matt Bartlett

Outside is always better .I'm an avid Traveler, Cyclist, Paddler,Hiker, Outdoor Adventurer, Sports Lover & Wannabe Runner. I write about adventures and share them on my website and for other outdoor publications. . Wannabe Runner Love being outdoors.I enjoy sharing outdoor experiences with others.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: